fortios_firewall_policy6 – Configure IPv6 policies in Fortinet’s FortiOS and FortiGate.

New in version 2.0.0.

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and policy6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.15

Tips

Using member operation to add an element to an existing object.

FortiOS Version Compatibility

Supported Version Ranges: v6.0.0 -> v6.2.7

Parameters

  • access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
  • enable_log - Enable/Disable logging for task. type: bool required: false default: False
  • vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
  • member_path - Member attribute path to operate on. type: str
  • member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
  • state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
  • firewall_policy6 - Configure IPv6 policies. type: dict more...
    • action - Policy action (allow/deny/ipsec). type: str choices: accept, deny, ipsec more...
    • anti_replay - Enable/disable anti-replay check. type: str choices: enable, disable more...
    • app_category - Application category ID list. type: list member_path: app_category:id more...
      • id - Category IDs. see Notes. type: int required: true more...
    • app_group - Application group names. type: list member_path: app_group:name more...
      • name - Application group names. Source application.group.name. type: str required: true more...
    • application - Application ID list. type: list member_path: application:id more...
      • id - Application IDs. see Notes. type: int required: true more...
    • application_list - Name of an existing Application list. Source application.list.name. type: str more...
    • auto_asic_offload - Enable/disable policy traffic ASIC offloading. type: str choices: enable, disable more...
    • av_profile - Name of an existing Antivirus profile. Source antivirus.profile.name. type: str more...
    • cifs_profile - Name of an existing CIFS profile. Source cifs.profile.name. type: str more...
    • comments - Comment. type: str more...
    • custom_log_fields - Log field index numbers to append custom log fields to log messages for this policy. type: list member_path: custom_log_fields:field_id more...
      • field_id - Custom log field. Source log.custom-field.id. type: str required: true more...
    • devices - Names of devices or device groups that can be matched by the policy. type: list member_path: devices:name more...
      • name - Device or group name. Source user.device.alias user.device-group.name user.device-category.name. type: str required: true more...
    • diffserv_forward - Enable to change packet"s DiffServ values to the specified diffservcode-forward value. type: str choices: enable, disable more...
    • diffserv_reverse - Enable to change packet"s reverse (reply) DiffServ values to the specified diffservcode-rev value. type: str choices: enable, disable more...
    • diffservcode_forward - Change packet"s DiffServ to this value. type: str more...
    • diffservcode_rev - Change packet"s reverse (reply) DiffServ to this value. type: str more...
    • dlp_sensor - Name of an existing DLP sensor. Source dlp.sensor.name. type: str more...
    • dnsfilter_profile - Name of an existing DNS filter profile. Source dnsfilter.profile.name. type: str more...
    • dscp_match - Enable DSCP check. type: str choices: enable, disable more...
    • dscp_negate - Enable negated DSCP match. type: str choices: enable, disable more...
    • dscp_value - DSCP value. type: str more...
    • dsri - Enable DSRI to ignore HTTP server responses. type: str choices: enable, disable more...
    • dstaddr - Destination address and address group names. type: list member_path: dstaddr:name more...
      • name - Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name system .external-resource.name. type: str required: true more...
    • dstaddr_negate - When enabled dstaddr specifies what the destination address must NOT be. type: str choices: enable, disable more...
    • dstintf - Outgoing (egress) interface. type: list member_path: dstintf:name more...
      • name - Interface name. Source system.interface.name system.zone.name. type: str required: true more...
    • emailfilter_profile - Name of an existing email filter profile. Source emailfilter.profile.name. type: str more...
    • firewall_session_dirty - How to handle sessions if the configuration of this firewall policy changes. type: str choices: check-all, check-new more...
    • fixedport - Enable to prevent source NAT from changing a session"s source port. type: str choices: enable, disable more...
    • fsso_groups - Names of FSSO groups. type: list member_path: fsso_groups:name more...
      • name - Names of FSSO groups. Source user.adgrp.name. type: str required: true more...
    • global_label - Label for the policy that appears when the GUI is in Global View mode. type: str more...
    • groups - Names of user groups that can authenticate with this policy. type: list member_path: groups:name more...
      • name - Group name. Source user.group.name. type: str required: true more...
    • http_policy_redirect - Redirect HTTP(S) traffic to matching transparent web proxy policy. type: str choices: enable, disable more...
    • icap_profile - Name of an existing ICAP profile. Source icap.profile.name. type: str more...
    • inbound - Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN. type: str choices: enable, disable more...
    • inspection_mode - Policy inspection mode (Flow/proxy). Default is Flow mode. type: str choices: proxy, flow more...
    • ippool - Enable to use IP Pools for source NAT. type: str choices: enable, disable more...
    • ips_sensor - Name of an existing IPS sensor. Source ips.sensor.name. type: str more...
    • label - Label for the policy that appears when the GUI is in Section View mode. type: str more...
    • logtraffic - Enable or disable logging. Log all sessions or security profile sessions. type: str choices: all, utm, disable more...
    • logtraffic_start - Record logs when a session starts. type: str choices: enable, disable more...
    • mms_profile - Name of an existing MMS profile. Source firewall.mms-profile.name. type: str more...
    • name - Policy name. type: str more...
    • nat - Enable/disable source NAT. type: str choices: enable, disable more...
    • natinbound - Policy-based IPsec VPN: apply destination NAT to inbound traffic. type: str choices: enable, disable more...
    • natoutbound - Policy-based IPsec VPN: apply source NAT to outbound traffic. type: str choices: enable, disable more...
    • np_acceleration - Enable/disable UTM Network Processor acceleration. type: str choices: enable, disable more...
    • outbound - Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN. type: str choices: enable, disable more...
    • per_ip_shaper - Per-IP traffic shaper. Source firewall.shaper.per-ip-shaper.name. type: str more...
    • policyid - Policy ID (0 - 4294967294). see Notes. type: int required: true more...
    • poolname - IP Pool names. type: list member_path: poolname:name more...
      • name - IP pool name. Source firewall.ippool6.name. type: str required: true more...
    • profile_group - Name of profile group. Source firewall.profile-group.name. type: str more...
    • profile_protocol_options - Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name. type: str more...
    • profile_type - Determine whether the firewall policy allows security profile groups or single profiles only. type: str choices: single, group more...
    • replacemsg_override_group - Override the default replacement message group for this policy. Source system.replacemsg-group.name. type: str more...
    • rsso - Enable/disable RADIUS single sign-on (RSSO). type: str choices: enable, disable more...
    • schedule - Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name. type: str more...
    • send_deny_packet - Enable/disable return of deny-packet. type: str choices: enable, disable more...
    • service - Service and service group names. type: list member_path: service:name more...
      • name - Address name. Source firewall.service.custom.name firewall.service.group.name. type: str required: true more...
    • service_negate - When enabled service specifies what the service must NOT be. type: str choices: enable, disable more...
    • session_ttl - Session TTL in seconds for sessions accepted by this policy. 0 means use the system default session TTL. type: str more...
    • spamfilter_profile - Name of an existing Spam filter profile. Source spamfilter.profile.name. type: str more...
    • srcaddr - Source address and address group names. type: list member_path: srcaddr:name more...
      • name - Address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name. type: str required: true more...
    • srcaddr_negate - When enabled srcaddr specifies what the source address must NOT be. type: str choices: enable, disable more...
    • srcintf - Incoming (ingress) interface. type: list member_path: srcintf:name more...
      • name - Interface name. Source system.zone.name system.interface.name. type: str required: true more...
    • ssh_filter_profile - Name of an existing SSH filter profile. Source ssh-filter.profile.name. type: str more...
    • ssh_policy_redirect - Redirect SSH traffic to matching transparent proxy policy. type: str choices: enable, disable more...
    • ssl_mirror - Enable to copy decrypted SSL traffic to a FortiGate interface (called SSL mirroring). type: str choices: enable, disable more...
    • ssl_mirror_intf - SSL mirror interface name. type: list member_path: ssl_mirror_intf:name more...
      • name - Interface name. Source system.zone.name system.interface.name. type: str required: true more...
    • ssl_ssh_profile - Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name. type: str more...
    • status - Enable or disable this policy. type: str choices: enable, disable more...
    • tcp_mss_receiver - Receiver TCP maximum segment size (MSS). type: int more...
    • tcp_mss_sender - Sender TCP maximum segment size (MSS). type: int more...
    • tcp_session_without_syn - Enable/disable creation of TCP session without SYN flag. type: str choices: all, data-only, disable more...
    • timeout_send_rst - Enable/disable sending RST packets when TCP sessions expire. type: str choices: enable, disable more...
    • tos - ToS (Type of Service) value used for comparison. type: str more...
    • tos_mask - Non-zero bit positions are used for comparison while zero bit positions are ignored. type: str more...
    • tos_negate - Enable negated TOS match. type: str choices: enable, disable more...
    • traffic_shaper - Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name. type: str more...
    • traffic_shaper_reverse - Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name. type: str more...
    • url_category - URL category ID list. type: list member_path: url_category:id more...
      • id - URL category ID. see Notes. type: int required: true more...
    • users - Names of individual users that can authenticate with this policy. type: list member_path: users:name more...
      • name - Names of individual users that can authenticate with this policy. Source user.local.name. type: str required: true more...
    • utm_status - Enable AV/web/ips protection profile. type: str choices: enable, disable more...
    • uuid - Universally Unique Identifier (UUID; automatically assigned but can be manually reset). type: str more...
    • vlan_cos_fwd - VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest type: int more...
    • vlan_cos_rev - VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest type: int more...
    • vlan_filter - Set VLAN filters. type: str more...
    • voip_profile - Name of an existing VoIP profile. Source voip.profile.name. type: str more...
    • vpntunnel - Policy-based IPsec VPN: name of the IPsec VPN Phase 1. Source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name. type: str more...
    • waf_profile - Name of an existing Web application firewall profile. Source waf.profile.name. type: str more...
    • webcache - Enable/disable web cache. type: str choices: enable, disable more...
    • webcache_https - Enable/disable web cache for HTTPS. type: str choices: disable, enable more...
    • webfilter_profile - Name of an existing Web filter profile. Source webfilter.profile.name. type: str more...
    • webproxy_forward_server - Web proxy forward server name. Source web-proxy.forward-server.name web-proxy.forward-server-group.name. type: str more...
    • webproxy_profile - Webproxy profile name. Source web-proxy.profile.name. type: str more...

Notes

Note

  • We highly recommend using your own value as the policyid instead of 0, while ‘0’ is a special placeholder that allows the backend to assign the latest available number for the object, it does have limitations. Please find more details in Q&A.

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- name: Configure IPv6 policies.
  fortinet.fortios.fortios_firewall_policy6:
      vdom: "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_policy6:
          action: "accept"
          anti_replay: "enable"
          app_category:
              -
                  id: "6"
          app_group:
              -
                  name: "default_name_8 (source application.group.name)"
          application:
              -
                  id: "10"
          application_list: "<your_own_value> (source application.list.name)"
          auto_asic_offload: "enable"
          av_profile: "<your_own_value> (source antivirus.profile.name)"
          cifs_profile: "<your_own_value> (source cifs.profile.name)"
          comments: "<your_own_value>"
          custom_log_fields:
              -
                  field_id: "<your_own_value> (source log.custom-field.id)"
          devices:
              -
                  name: "default_name_19 (source user.device.alias user.device-group.name user.device-category.name)"
          diffserv_forward: "enable"
          diffserv_reverse: "enable"
          diffservcode_forward: "<your_own_value>"
          diffservcode_rev: "<your_own_value>"
          dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
          dnsfilter_profile: "<your_own_value> (source dnsfilter.profile.name)"
          dscp_match: "enable"
          dscp_negate: "enable"
          dscp_value: "<your_own_value>"
          dsri: "enable"
          dstaddr:
              -
                  name: "default_name_31 (source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name system
                    .external-resource.name)"
          dstaddr_negate: "enable"
          dstintf:
              -
                  name: "default_name_34 (source system.interface.name system.zone.name)"
          emailfilter_profile: "<your_own_value> (source emailfilter.profile.name)"
          firewall_session_dirty: "check-all"
          fixedport: "enable"
          fsso_groups:
              -
                  name: "default_name_39 (source user.adgrp.name)"
          global_label: "<your_own_value>"
          groups:
              -
                  name: "default_name_42 (source user.group.name)"
          http_policy_redirect: "enable"
          icap_profile: "<your_own_value> (source icap.profile.name)"
          inbound: "enable"
          inspection_mode: "proxy"
          ippool: "enable"
          ips_sensor: "<your_own_value> (source ips.sensor.name)"
          label: "<your_own_value>"
          logtraffic: "all"
          logtraffic_start: "enable"
          mms_profile: "<your_own_value> (source firewall.mms-profile.name)"
          name: "default_name_53"
          nat: "enable"
          natinbound: "enable"
          natoutbound: "enable"
          np_acceleration: "enable"
          outbound: "enable"
          per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
          policyid: "<you_own_value>"
          poolname:
              -
                  name: "default_name_62 (source firewall.ippool6.name)"
          profile_group: "<your_own_value> (source firewall.profile-group.name)"
          profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)"
          profile_type: "single"
          replacemsg_override_group: "<your_own_value> (source system.replacemsg-group.name)"
          rsso: "enable"
          schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
          send_deny_packet: "enable"
          service:
              -
                  name: "default_name_71 (source firewall.service.custom.name firewall.service.group.name)"
          service_negate: "enable"
          session_ttl: "<your_own_value>"
          spamfilter_profile: "<your_own_value> (source spamfilter.profile.name)"
          srcaddr:
              -
                  name: "default_name_76 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
          srcaddr_negate: "enable"
          srcintf:
              -
                  name: "default_name_79 (source system.zone.name system.interface.name)"
          ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)"
          ssh_policy_redirect: "enable"
          ssl_mirror: "enable"
          ssl_mirror_intf:
              -
                  name: "default_name_84 (source system.zone.name system.interface.name)"
          ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
          status: "enable"
          tcp_mss_receiver: "32767"
          tcp_mss_sender: "32767"
          tcp_session_without_syn: "all"
          timeout_send_rst: "enable"
          tos: "<your_own_value>"
          tos_mask: "<your_own_value>"
          tos_negate: "enable"
          traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
          traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
          url_category:
              -
                  id: "97"
          users:
              -
                  name: "default_name_99 (source user.local.name)"
          utm_status: "enable"
          uuid: "<your_own_value>"
          vlan_cos_fwd: "3"
          vlan_cos_rev: "3"
          vlan_filter: "<your_own_value>"
          voip_profile: "<your_own_value> (source voip.profile.name)"
          vpntunnel: "<your_own_value> (source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name)"
          waf_profile: "<your_own_value> (source waf.profile.name)"
          webcache: "enable"
          webcache_https: "disable"
          webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
          webproxy_forward_server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)"
          webproxy_profile: "<your_own_value> (source web-proxy.profile.name)"

Return Values

Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:

  • build - Build number of the fortigate image returned: always type: str sample: 1547
  • http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
  • http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
  • mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
  • name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
  • path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
  • revision - Internal revision number returned: always type: str sample: 17.0.2.10658
  • serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
  • status - Indication of the operation's result returned: always type: str sample: success
  • vdom - Virtual domain used returned: always type: str sample: root
  • version - Version of the FortiGate returned: always type: str sample: v5.6.3

Status

  • This module is not guaranteed to have a backwards compatible interface.

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can create a pull request to improve it.