:source: fortios_web_proxy_forward_server.py
:orphan:
.. fortios_web_proxy_forward_server:
fortios_web_proxy_forward_server -- Configure forward-server addresses in Fortinet's FortiOS and FortiGate.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify web_proxy feature and forward_server category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.16
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v6.0.0 -> v7.6.6
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- web_proxy_forward_server - Configure forward-server addresses. type: dict
more...
| Supported Version Ranges |
| web_proxy_forward_server |
v6.0.0 -> 7.6.6 |
- addr_type - Address type of the forwarding proxy server: IP or FQDN. type: str choices: ip, ipv6, fqdn
more...
|
Supported Version Ranges |
| addr_type |
v6.0.0 -> 7.6.6 |
| [ip] |
v6.0.0 -> 7.6.6 |
| [ipv6] |
v7.4.1 -> 7.6.6 |
| [fqdn] |
v6.0.0 -> 7.6.6 |
- comment - Comment. type: str
more...
|
Supported Version Ranges |
| comment |
v6.0.0 -> 7.6.6 |
- fqdn - Forward server Fully Qualified Domain Name (FQDN). type: str
more...
|
Supported Version Ranges |
| fqdn |
v6.0.0 -> 7.6.6 |
- healthcheck - Enable/disable forward server health checking. Attempts to connect through the remote forwarding server to a destination to verify that the forwarding server is operating normally. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| healthcheck |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
- interface - Specify outgoing interface to reach server. Source system.interface.name. type: str
more...
|
Supported Version Ranges |
| interface |
v7.6.1 -> 7.6.6 |
- interface_select_method - Specify how to select outgoing interface to reach server. type: str choices: sdwan, specify
more...
|
Supported Version Ranges |
| interface_select_method |
v7.6.1 -> 7.6.6 |
| [sdwan] |
v7.6.1 -> 7.6.6 |
| [specify] |
v7.6.1 -> 7.6.6 |
- ip - Forward proxy server IP address. type: str
more...
|
Supported Version Ranges |
| ip |
v6.0.0 -> 7.6.6 |
- ipv6 - Forward proxy server IPv6 address. type: str
more...
|
Supported Version Ranges |
| ipv6 |
v7.4.1 -> 7.6.6 |
- masquerade - Enable/disable use of the IP address of the outgoing interface as the client IP address type: str choices: enable, disable
more...
|
Supported Version Ranges |
| masquerade |
v7.4.2 -> 7.6.6 |
| [enable] |
v7.4.2 -> 7.6.6 |
| [disable] |
v7.4.2 -> 7.6.6 |
- monitor - URL for forward server health check monitoring . type: str
more...
|
Supported Version Ranges |
| monitor |
v6.0.0 -> 7.6.6 |
- name - Server name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v6.0.0 -> 7.6.6 |
- password - HTTP authentication password. type: str
more...
|
Supported Version Ranges |
| password |
v6.4.0 -> 7.6.6 |
- port - Port number that the forwarding server expects to receive HTTP sessions on (1 - 65535). type: int
more...
|
Supported Version Ranges |
| port |
v6.0.0 -> 7.6.6 |
- server_down_option - Action to take when the forward server is found to be down: block sessions until the server is back up or pass sessions to their destination. type: str choices: block, pass
more...
|
Supported Version Ranges |
| server_down_option |
v6.0.0 -> 7.6.6 |
| [block] |
v6.0.0 -> 7.6.6 |
| [pass] |
v6.0.0 -> 7.6.6 |
- username - HTTP authentication user name. type: str
more...
|
Supported Version Ranges |
| username |
v6.4.0 -> 7.6.6 |
- vrf_select - VRF ID used for connection to server. type: int
more...
|
Supported Version Ranges |
| vrf_select |
v7.6.1 -> 7.6.6 |
Notes
-----
.. note::
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: Configure forward-server addresses.
fortinet.fortios.fortios_web_proxy_forward_server:
vdom: "{{ vdom }}"
state: "present"
access_token: ""
web_proxy_forward_server:
addr_type: "ip"
comment: "Comment."
fqdn: ""
healthcheck: "disable"
interface: " (source system.interface.name)"
interface_select_method: "sdwan"
ip: ""
ipv6: ""
masquerade: "enable"
monitor: ""
name: "default_name_13"
password: ""
port: "3128"
server_down_option: "block"
username: ""
vrf_select: "-1"
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.