:source: fortios_system_pppoe_interface.py
:orphan:
.. fortios_system_pppoe_interface:
fortios_system_pppoe_interface -- Configure the PPPoE interfaces in Fortinet's FortiOS and FortiGate.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and pppoe_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.16
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v6.0.0 -> v7.6.6
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- system_pppoe_interface - Configure the PPPoE interfaces. type: dict
more...
| Supported Version Ranges |
| system_pppoe_interface |
v6.0.0 -> 7.6.6 |
- ac_name - PPPoE AC name. type: str
more...
|
Supported Version Ranges |
| ac_name |
v6.0.0 -> 7.6.6 |
- auth_type - PPP authentication type to use. type: str choices: auto, pap, chap, mschapv1, mschapv2
more...
|
Supported Version Ranges |
| auth_type |
v6.0.0 -> 7.6.6 |
| [auto] |
v6.0.0 -> 7.6.6 |
| [pap] |
v6.0.0 -> 7.6.6 |
| [chap] |
v6.0.0 -> 7.6.6 |
| [mschapv1] |
v6.0.0 -> 7.6.6 |
| [mschapv2] |
v6.0.0 -> 7.6.6 |
- device - Name for the physical interface. Source system.interface.name. type: str
more...
|
Supported Version Ranges |
| device |
v6.0.0 -> 7.6.6 |
- dial_on_demand - Enable/disable dial on demand to dial the PPPoE interface when packets are routed to the PPPoE interface. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| dial_on_demand |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- disc_retry_timeout - PPPoE discovery init timeout value in (0-4294967295 sec). type: int
more...
|
Supported Version Ranges |
| disc_retry_timeout |
v6.0.0 -> 7.6.6 |
- idle_timeout - PPPoE auto disconnect after idle timeout (0-4294967295 sec). type: int
more...
|
Supported Version Ranges |
| idle_timeout |
v6.0.0 -> 7.6.6 |
- ipunnumbered - PPPoE unnumbered IP. type: str
more...
|
Supported Version Ranges |
| ipunnumbered |
v6.0.0 -> 7.6.6 |
- ipv6 - Enable/disable IPv6 Control Protocol (IPv6CP). type: str choices: enable, disable
more...
|
Supported Version Ranges |
| ipv6 |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- lcp_echo_interval - Time in seconds between PPPoE Link Control Protocol (LCP) echo requests. type: int
more...
|
Supported Version Ranges |
| lcp_echo_interval |
v6.0.0 -> 7.6.6 |
- lcp_max_echo_fails - Maximum missed LCP echo messages before disconnect. type: int
more...
|
Supported Version Ranges |
| lcp_max_echo_fails |
v6.0.0 -> 7.6.6 |
- mrru - PPP MRRU (296 - 65535). type: int
more...
|
Supported Version Ranges |
| mrru |
v7.6.5 -> 7.6.6 |
- multilink - Enable/disable PPP multilink support. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| multilink |
v7.6.5 -> 7.6.6 |
| [enable] |
v7.6.5 -> 7.6.6 |
| [disable] |
v7.6.5 -> 7.6.6 |
- name - Name of the PPPoE interface. type: str required: true
more...
|
Supported Version Ranges |
| name |
v6.0.0 -> 7.6.6 |
- padt_retry_timeout - PPPoE terminate timeout value in (0-4294967295 sec). type: int
more...
|
Supported Version Ranges |
| padt_retry_timeout |
v6.0.0 -> 7.6.6 |
- password - Enter the password. type: str
more...
|
Supported Version Ranges |
| password |
v6.0.0 -> 7.6.6 |
- pppoe_egress_cos - CoS in VLAN tag for outgoing PPPoE/PPP packets. type: str choices: cos0, cos1, cos2, cos3, cos4, cos5, cos6, cos7
more...
|
Supported Version Ranges |
| pppoe_egress_cos |
v7.6.0 -> 7.6.6 |
| [cos0] |
v7.6.0 -> 7.6.6 |
| [cos1] |
v7.6.0 -> 7.6.6 |
| [cos2] |
v7.6.0 -> 7.6.6 |
| [cos3] |
v7.6.0 -> 7.6.6 |
| [cos4] |
v7.6.0 -> 7.6.6 |
| [cos5] |
v7.6.0 -> 7.6.6 |
| [cos6] |
v7.6.0 -> 7.6.6 |
| [cos7] |
v7.6.0 -> 7.6.6 |
- pppoe_unnumbered_negotiate - Enable/disable PPPoE unnumbered negotiation. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| pppoe_unnumbered_negotiate |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- service_name - PPPoE service name. type: str
more...
|
Supported Version Ranges |
| service_name |
v6.0.0 -> 7.6.6 |
- username - User name. type: str
more...
|
Supported Version Ranges |
| username |
v6.0.0 -> 7.6.6 |
Notes
-----
.. note::
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: Configure the PPPoE interfaces.
fortinet.fortios.fortios_system_pppoe_interface:
vdom: "{{ vdom }}"
state: "present"
access_token: ""
system_pppoe_interface:
ac_name: ""
auth_type: "auto"
device: " (source system.interface.name)"
dial_on_demand: "enable"
disc_retry_timeout: "1"
idle_timeout: "0"
ipunnumbered: ""
ipv6: "enable"
lcp_echo_interval: "5"
lcp_max_echo_fails: "3"
mrru: "1500"
multilink: "enable"
name: "default_name_15"
padt_retry_timeout: "1"
password: ""
pppoe_egress_cos: "cos0"
pppoe_unnumbered_negotiate: "enable"
service_name: ""
username: ""
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.