:source: fortios_system_link_monitor.py :orphan: .. fortios_system_link_monitor: fortios_system_link_monitor -- Configure Link Health Monitor in Fortinet's FortiOS and FortiGate. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ .. versionadded:: 2.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and link_monitor category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0 Requirements ------------ The below requirements are needed on the host that executes this module. - ansible>=2.16 Tips ---- Using member operation to add an element to an existing object. FortiOS Version Compatibility ----------------------------- Supported Version Ranges: v6.0.0 -> v7.6.6 Parameters ---------- .. raw:: html Notes ----- .. note:: - Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks - The module supports check_mode. Examples -------- .. code-block:: yaml+jinja - name: Configure Link Health Monitor. fortinet.fortios.fortios_system_link_monitor: vdom: "{{ vdom }}" state: "present" access_token: "" system_link_monitor: addr_mode: "ipv4" class_id: "0" diffservcode: "" fail_weight: "0" failtime: "5" gateway_ip: "" gateway_ip6: "" ha_priority: "1" http_agent: "" http_get: "" http_match: "" interval: "500" name: "default_name_15" packet_size: "124" password: "" port: "0" probe_count: "30" probe_timeout: "500" protocol: "ping" recoverytime: "5" route: - subnet: "" security_mode: "none" server: - address: "" server_config: "default" server_list: - dst: "" id: "31" port: "0" protocol: "ping" weight: "0" server_type: "static" service_detection: "enable" source_ip: "84.230.14.43" source_ip6: "" srcintf: " (source system.interface.name)" status: "enable" update_cascade_interface: "enable" update_policy_route: "enable" update_static_route: "enable" Return Values ------------- Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module: .. raw:: html
  • build - Build number of the fortigate image returned: always type: str sample: 1547
  • http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
  • http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
  • mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
  • name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
  • path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
  • revision - Internal revision number returned: always type: str sample: 17.0.2.10658
  • serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
  • status - Indication of the operation's result returned: always type: str sample: success
  • vdom - Virtual domain used returned: always type: str sample: root
  • version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status ------ - This module is not guaranteed to have a backwards compatible interface. Authors ------- - Link Zheng (@chillancezen) - Jie Xue (@JieX19) - Hongbin Lu (@fgtdev-hblu) - Frank Shen (@frankshen01) - Miguel Angel Munoz (@mamunozgonzalez) - Nicolas Thomas (@thomnico) .. hint:: If you notice any issues in this documentation, you can create a pull request to improve it.