:source: fortios_system_cluster_sync.py :orphan: .. fortios_system_cluster_sync: fortios_system_cluster_sync -- Configure FortiGate Session Life Support Protocol (FGSP) session synchronization in Fortinet's FortiOS and FortiGate. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ .. versionadded:: 2.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and cluster_sync category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0 Requirements ------------ The below requirements are needed on the host that executes this module. - ansible>=2.16 Tips ---- Using member operation to add an element to an existing object. FortiOS Version Compatibility ----------------------------- Supported Version Ranges: v6.0.0 -> v7.2.0 Parameters ---------- .. raw:: html Notes ----- .. note:: - We highly recommend using your own value as the sync_id instead of 0, while '0' is a special placeholder that allows the backend to assign the latest available number for the object, it does have limitations. Please find more details in Q&A. - Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks - The module supports check_mode. Examples -------- .. code-block:: yaml+jinja - name: Configure FortiGate Session Life Support Protocol (FGSP) session synchronization. fortinet.fortios.fortios_system_cluster_sync: vdom: "{{ vdom }}" state: "present" access_token: "" system_cluster_sync: down_intfs_before_sess_sync: - name: "default_name_4 (source system.interface.name)" hb_interval: "2" hb_lost_threshold: "3" ike_heartbeat_interval: "3" ike_monitor: "enable" ike_monitor_interval: "15" ike_seqjump_speed: "10" ipsec_tunnel_sync: "enable" peerip: "" peervd: " (source system.vdom.name)" secondary_add_ipsec_routes: "enable" session_sync_filter: custom_service: - dst_port_range: "" id: "18" src_port_range: "" dstaddr: "" dstaddr6: "" dstintf: " (source system.interface.name)" srcaddr: "" srcaddr6: "" srcintf: " (source system.interface.name)" slave_add_ike_routes: "enable" sync_id: "" syncvd: - name: "default_name_29 (source system.vdom.name)" Return Values ------------- Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module: .. raw:: html
  • build - Build number of the fortigate image returned: always type: str sample: 1547
  • http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
  • http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
  • mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
  • name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
  • path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
  • revision - Internal revision number returned: always type: str sample: 17.0.2.10658
  • serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
  • status - Indication of the operation's result returned: always type: str sample: success
  • vdom - Virtual domain used returned: always type: str sample: root
  • version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status ------ - This module is not guaranteed to have a backwards compatible interface. Authors ------- - Link Zheng (@chillancezen) - Jie Xue (@JieX19) - Hongbin Lu (@fgtdev-hblu) - Frank Shen (@frankshen01) - Miguel Angel Munoz (@mamunozgonzalez) - Nicolas Thomas (@thomnico) .. hint:: If you notice any issues in this documentation, you can create a pull request to improve it.