:source: fortios_firewall_internet_service_extension.py :orphan: .. fortios_firewall_internet_service_extension: fortios_firewall_internet_service_extension -- Configure Internet Services Extension in Fortinet's FortiOS and FortiGate. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ .. versionadded:: 2.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and internet_service_extension category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0 Requirements ------------ The below requirements are needed on the host that executes this module. - ansible>=2.16 Tips ---- Using member operation to add an element to an existing object. FortiOS Version Compatibility ----------------------------- Supported Version Ranges: v6.2.0 -> v7.6.6 Parameters ---------- .. raw:: html Notes ----- .. note:: - We highly recommend using your own value as the id instead of 0, while '0' is a special placeholder that allows the backend to assign the latest available number for the object, it does have limitations. Please find more details in Q&A. - Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks - The module supports check_mode. Examples -------- .. code-block:: yaml+jinja - name: Configure Internet Services Extension. fortinet.fortios.fortios_firewall_internet_service_extension: vdom: "{{ vdom }}" state: "present" access_token: "" firewall_internet_service_extension: comment: "Comment." disable_entry: - addr_mode: "ipv4" id: "6" ip_range: - end_ip: "" id: "9" start_ip: "" ip6_range: - end_ip6: "" id: "13" start_ip6: "" port_range: - end_port: "65535" id: "17" start_port: "1" protocol: "0" entry: - addr_mode: "ipv4" dst: - name: "default_name_23 (source firewall.address.name firewall.addrgrp.name)" dst6: - name: "default_name_25 (source firewall.address6.name firewall.addrgrp6.name)" id: "26" port_range: - end_port: "65535" id: "29" start_port: "1" protocol: "0" id: "32 (source firewall.internet-service.id)" Return Values ------------- Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module: .. raw:: html
  • build - Build number of the fortigate image returned: always type: str sample: 1547
  • http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
  • http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
  • mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
  • name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
  • path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
  • revision - Internal revision number returned: always type: str sample: 17.0.2.10658
  • serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
  • status - Indication of the operation's result returned: always type: str sample: success
  • vdom - Virtual domain used returned: always type: str sample: root
  • version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status ------ - This module is not guaranteed to have a backwards compatible interface. Authors ------- - Link Zheng (@chillancezen) - Jie Xue (@JieX19) - Hongbin Lu (@fgtdev-hblu) - Frank Shen (@frankshen01) - Miguel Angel Munoz (@mamunozgonzalez) - Nicolas Thomas (@thomnico) .. hint:: If you notice any issues in this documentation, you can create a pull request to improve it.