:source: fortios_extender_controller_extender_profile.py
:orphan:
.. fortios_extender_controller_extender_profile:
fortios_extender_controller_extender_profile -- FortiExtender extender profile configuration in Fortinet's FortiOS and FortiGate.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify extender_controller feature and extender_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.16
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v7.0.2 -> v7.2.0
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- extender_controller_extender_profile - FortiExtender extender profile configuration. type: dict
more...
| Supported Version Ranges |
| extender_controller_extender_profile |
v7.0.2 -> v7.2.0 |
- allowaccess - Control management access to the managed extender. Separate entries with a space. type: list choices: ping, telnet, http, https, ssh, snmp
more...
|
Supported Version Ranges |
| allowaccess |
v7.0.2 -> v7.2.0 |
| [ping] |
v7.0.2 -> v7.2.0 |
| [telnet] |
v7.0.2 -> v7.2.0 |
| [http] |
v7.0.2 -> v7.2.0 |
| [https] |
v7.0.2 -> v7.2.0 |
| [ssh] |
v7.0.2 -> v7.2.0 |
| [snmp] |
v7.0.2 -> v7.2.0 |
- bandwidth_limit - FortiExtender LAN extension bandwidth limit (Mbps). type: int
more...
|
Supported Version Ranges |
| bandwidth_limit |
v7.0.2 -> v7.2.0 |
- cellular - FortiExtender cellular configuration. type: dict
more...
| Supported Version Ranges |
| cellular |
v7.0.2 -> v7.2.0 |
- controller_report - FortiExtender controller report configuration. type: dict
more...
| Supported Version Ranges |
| controller_report |
v7.0.2 -> v7.2.0 |
- interval - Controller report interval. type: int
more...
|
Supported Version Ranges |
| interval |
v7.0.2 -> v7.2.0 |
- signal_threshold - Controller report signal threshold. type: int
more...
|
Supported Version Ranges |
| signal_threshold |
v7.0.2 -> v7.2.0 |
- status - FortiExtender controller report status. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| status |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- dataplan - Dataplan names. type: list member_path: cellular/dataplan:name
more...
| Supported Version Ranges |
| dataplan |
v7.0.2 -> v7.2.0 |
- name - Dataplan name. Source extender-controller.dataplan.name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v7.0.2 -> v7.2.0 |
- modem1 - Configuration options for modem 1. type: dict
more...
| Supported Version Ranges |
| modem1 |
v7.0.2 -> v7.2.0 |
- auto_switch - FortiExtender auto switch configuration. type: dict
more...
| Supported Version Ranges |
| auto_switch |
v7.0.2 -> v7.2.0 |
- dataplan - Automatically switch based on data usage. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| dataplan |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- disconnect - Auto switch by disconnect. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| disconnect |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- disconnect_period - Automatically switch based on disconnect period. type: int
more...
|
Supported Version Ranges |
| disconnect_period |
v7.0.2 -> v7.2.0 |
- disconnect_threshold - Automatically switch based on disconnect threshold. type: int
more...
|
Supported Version Ranges |
| disconnect_threshold |
v7.0.2 -> v7.2.0 |
- signal - Automatically switch based on signal strength. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| signal |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- switch_back - Auto switch with switch back multi-options. type: list choices: time, timer
more...
|
Supported Version Ranges |
| switch_back |
v7.0.2 -> v7.2.0 |
| [time] |
v7.0.2 -> v7.2.0 |
| [timer] |
v7.0.2 -> v7.2.0 |
- switch_back_time - Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM). type: str
more...
|
Supported Version Ranges |
| switch_back_time |
v7.0.2 -> v7.2.0 |
- switch_back_timer - Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec). type: int
more...
|
Supported Version Ranges |
| switch_back_timer |
v7.0.2 -> v7.2.0 |
- conn_status - Connection status. type: int
more...
|
Supported Version Ranges |
| conn_status |
v7.0.2 -> v7.0.5 |
v7.2.0 -> v7.2.0 |
- default_sim - Default SIM selection. type: str choices: sim1, sim2, carrier, cost
more...
|
Supported Version Ranges |
| default_sim |
v7.0.2 -> v7.2.0 |
| [sim1] |
v7.0.2 -> v7.2.0 |
| [sim2] |
v7.0.2 -> v7.2.0 |
| [carrier] |
v7.0.2 -> v7.2.0 |
| [cost] |
v7.0.2 -> v7.2.0 |
- gps - FortiExtender GPS enable/disable. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| gps |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- preferred_carrier - Preferred carrier. type: str
more...
|
Supported Version Ranges |
| preferred_carrier |
v7.0.2 -> v7.2.0 |
- redundant_intf - Redundant interface. type: str
more...
|
Supported Version Ranges |
| redundant_intf |
v7.0.2 -> v7.2.0 |
- redundant_mode - FortiExtender mode. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| redundant_mode |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- sim1_pin - SIM type: str choices: disable, enable
more...
|
Supported Version Ranges |
| sim1_pin |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- sim1_pin_code - SIM type: str
more...
|
Supported Version Ranges |
| sim1_pin_code |
v7.0.2 -> v7.2.0 |
- sim2_pin - SIM type: str choices: disable, enable
more...
|
Supported Version Ranges |
| sim2_pin |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- sim2_pin_code - SIM type: str
more...
|
Supported Version Ranges |
| sim2_pin_code |
v7.0.2 -> v7.2.0 |
- modem2 - Configuration options for modem 2. type: dict
more...
| Supported Version Ranges |
| modem2 |
v7.0.2 -> v7.2.0 |
- auto_switch - FortiExtender auto switch configuration. type: dict
more...
| Supported Version Ranges |
| auto_switch |
v7.0.2 -> v7.2.0 |
- dataplan - Automatically switch based on data usage. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| dataplan |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- disconnect - Auto switch by disconnect. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| disconnect |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- disconnect_period - Automatically switch based on disconnect period. type: int
more...
|
Supported Version Ranges |
| disconnect_period |
v7.0.2 -> v7.2.0 |
- disconnect_threshold - Automatically switch based on disconnect threshold. type: int
more...
|
Supported Version Ranges |
| disconnect_threshold |
v7.0.2 -> v7.2.0 |
- signal - Automatically switch based on signal strength. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| signal |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- switch_back - Auto switch with switch back multi-options. type: list choices: time, timer
more...
|
Supported Version Ranges |
| switch_back |
v7.0.2 -> v7.2.0 |
| [time] |
v7.0.2 -> v7.2.0 |
| [timer] |
v7.0.2 -> v7.2.0 |
- switch_back_time - Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM). type: str
more...
|
Supported Version Ranges |
| switch_back_time |
v7.0.2 -> v7.2.0 |
- switch_back_timer - Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec). type: int
more...
|
Supported Version Ranges |
| switch_back_timer |
v7.0.2 -> v7.2.0 |
- conn_status - Connection status. type: int
more...
|
Supported Version Ranges |
| conn_status |
v7.0.2 -> v7.0.5 |
v7.2.0 -> v7.2.0 |
- default_sim - Default SIM selection. type: str choices: sim1, sim2, carrier, cost
more...
|
Supported Version Ranges |
| default_sim |
v7.0.2 -> v7.2.0 |
| [sim1] |
v7.0.2 -> v7.2.0 |
| [sim2] |
v7.0.2 -> v7.2.0 |
| [carrier] |
v7.0.2 -> v7.2.0 |
| [cost] |
v7.0.2 -> v7.2.0 |
- gps - FortiExtender GPS enable/disable. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| gps |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- preferred_carrier - Preferred carrier. type: str
more...
|
Supported Version Ranges |
| preferred_carrier |
v7.0.2 -> v7.2.0 |
- redundant_intf - Redundant interface. type: str
more...
|
Supported Version Ranges |
| redundant_intf |
v7.0.2 -> v7.2.0 |
- redundant_mode - FortiExtender mode. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| redundant_mode |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- sim1_pin - SIM type: str choices: disable, enable
more...
|
Supported Version Ranges |
| sim1_pin |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- sim1_pin_code - SIM type: str
more...
|
Supported Version Ranges |
| sim1_pin_code |
v7.0.2 -> v7.2.0 |
- sim2_pin - SIM type: str choices: disable, enable
more...
|
Supported Version Ranges |
| sim2_pin |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- sim2_pin_code - SIM type: str
more...
|
Supported Version Ranges |
| sim2_pin_code |
v7.0.2 -> v7.2.0 |
- sms_notification - FortiExtender cellular SMS notification configuration. type: dict
more...
| Supported Version Ranges |
| sms_notification |
v7.0.2 -> v7.2.0 |
- alert - SMS alert list. type: dict
more...
| Supported Version Ranges |
| alert |
v7.0.2 -> v7.2.0 |
- data_exhausted - Display string when data exhausted. type: str
more...
|
Supported Version Ranges |
| data_exhausted |
v7.0.2 -> v7.2.0 |
- fgt_backup_mode_switch - Display string when FortiGate backup mode switched. type: str
more...
|
Supported Version Ranges |
| fgt_backup_mode_switch |
v7.0.2 -> v7.2.0 |
- low_signal_strength - Display string when signal strength is low. type: str
more...
|
Supported Version Ranges |
| low_signal_strength |
v7.0.2 -> v7.2.0 |
- mode_switch - Display string when mode is switched. type: str
more...
|
Supported Version Ranges |
| mode_switch |
v7.0.2 -> v7.2.0 |
- os_image_fallback - Display string when falling back to a previous OS image. type: str
more...
|
Supported Version Ranges |
| os_image_fallback |
v7.0.2 -> v7.2.0 |
- session_disconnect - Display string when session disconnected. type: str
more...
|
Supported Version Ranges |
| session_disconnect |
v7.0.2 -> v7.2.0 |
- system_reboot - Display string when system rebooted. type: str
more...
|
Supported Version Ranges |
| system_reboot |
v7.0.2 -> v7.2.0 |
- receiver - SMS notification receiver list. type: list member_path: cellular/sms_notification/receiver:name
more...
| Supported Version Ranges |
| receiver |
v7.0.2 -> v7.2.0 |
- alert - Alert multi-options. type: list choices: system-reboot, data-exhausted, session-disconnect, low-signal-strength, mode-switch, os-image-fallback, fgt-backup-mode-switch
more...
|
Supported Version Ranges |
| alert |
v7.0.2 -> v7.2.0 |
| [system-reboot] |
v7.0.2 -> v7.2.0 |
| [data-exhausted] |
v7.0.2 -> v7.2.0 |
| [session-disconnect] |
v7.0.2 -> v7.2.0 |
| [low-signal-strength] |
v7.0.2 -> v7.2.0 |
| [mode-switch] |
v7.0.2 -> v7.2.0 |
| [os-image-fallback] |
v7.0.2 -> v7.2.0 |
| [fgt-backup-mode-switch] |
v7.0.2 -> v7.2.0 |
- name - FortiExtender SMS notification receiver name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v7.0.2 -> v7.2.0 |
- phone_number - Receiver phone number. Format: [+][country code][area code][local phone number]. For example, +16501234567. type: str
more...
|
Supported Version Ranges |
| phone_number |
v7.0.2 -> v7.2.0 |
- status - SMS notification receiver status. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| status |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- status - FortiExtender SMS notification status. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| status |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
- enforce_bandwidth - Enable/disable enforcement of bandwidth on LAN extension interface. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| enforce_bandwidth |
v7.0.2 -> v7.2.0 |
| [enable] |
v7.0.2 -> v7.2.0 |
| [disable] |
v7.0.2 -> v7.2.0 |
- extension - Extension option. type: str choices: wan-extension, lan-extension
more...
|
Supported Version Ranges |
| extension |
v7.0.2 -> v7.2.0 |
| [wan-extension] |
v7.0.2 -> v7.2.0 |
| [lan-extension] |
v7.0.2 -> v7.2.0 |
- id - ID. type: int
more...
|
Supported Version Ranges |
| id |
v7.0.2 -> v7.2.0 |
- lan_extension - FortiExtender lan extension configuration. type: dict
more...
| Supported Version Ranges |
| lan_extension |
v7.0.2 -> v7.2.0 |
- backhaul - LAN extension backhaul tunnel configuration. type: list member_path: lan_extension/backhaul:name
more...
| Supported Version Ranges |
| backhaul |
v7.0.2 -> v7.2.0 |
- name - FortiExtender LAN extension backhaul name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v7.0.2 -> v7.2.0 |
- port - FortiExtender uplink port. type: str choices: wan, lte1, lte2, port1, port2, port3, port4, port5, sfp
more...
|
Supported Version Ranges |
| port |
v7.0.2 -> v7.2.0 |
| [wan] |
v7.0.2 -> v7.2.0 |
| [lte1] |
v7.0.2 -> v7.2.0 |
| [lte2] |
v7.0.2 -> v7.2.0 |
| [port1] |
v7.0.2 -> v7.2.0 |
| [port2] |
v7.0.2 -> v7.2.0 |
| [port3] |
v7.0.2 -> v7.2.0 |
| [port4] |
v7.0.2 -> v7.2.0 |
| [port5] |
v7.0.2 -> v7.2.0 |
| [sfp] |
v7.0.2 -> v7.2.0 |
- role - FortiExtender uplink port. type: str choices: primary, secondary
more...
|
Supported Version Ranges |
| role |
v7.0.2 -> v7.2.0 |
| [primary] |
v7.0.2 -> v7.2.0 |
| [secondary] |
v7.0.2 -> v7.2.0 |
- weight - WRR weight parameter. type: int
more...
|
Supported Version Ranges |
| weight |
v7.0.2 -> v7.2.0 |
- backhaul_interface - IPsec phase1 interface. Source system.interface.name. type: str
more...
|
Supported Version Ranges |
| backhaul_interface |
v7.0.2 -> v7.2.0 |
- backhaul_ip - IPsec phase1 IPv4/FQDN. Used to specify the external IP/FQDN when the FortiGate unit is behind a NAT device. type: str
more...
|
Supported Version Ranges |
| backhaul_ip |
v7.0.2 -> v7.2.0 |
- ipsec_tunnel - IPsec tunnel name. type: str
more...
|
Supported Version Ranges |
| ipsec_tunnel |
v7.0.2 -> v7.2.0 |
- link_loadbalance - LAN extension link load balance strategy. type: str choices: activebackup, loadbalance
more...
|
Supported Version Ranges |
| link_loadbalance |
v7.0.2 -> v7.2.0 |
| [activebackup] |
v7.0.2 -> v7.2.0 |
| [loadbalance] |
v7.0.2 -> v7.2.0 |
- login_password - Set the managed extender"s administrator password. type: str
more...
|
Supported Version Ranges |
| login_password |
v7.0.2 -> v7.2.0 |
- login_password_change - Change or reset the administrator password of a managed extender (yes, default, or no). type: str choices: yes, default, no
more...
|
Supported Version Ranges |
| login_password_change |
v7.0.2 -> v7.2.0 |
| [yes] |
v7.0.2 -> v7.2.0 |
| [default] |
v7.0.2 -> v7.2.0 |
| [no] |
v7.0.2 -> v7.2.0 |
- model - Model. type: str choices: FX201E, FX211E, FX200F, FXA11F, FXE11F, FXA21F, FXE21F, FXA22F, FXE22F, FX212F, FX311F, FX312F, FX511F, FVG21F, FVA21F, FVG22F, FVA22F, FX04DA, FX04DN, FX04DI
more...
|
Supported Version Ranges |
| model |
v7.0.2 -> v7.2.0 |
| [FX201E] |
v7.0.2 -> v7.2.0 |
| [FX211E] |
v7.0.2 -> v7.2.0 |
| [FX200F] |
v7.0.2 -> v7.2.0 |
| [FXA11F] |
v7.0.2 -> v7.2.0 |
| [FXE11F] |
v7.0.2 -> v7.2.0 |
| [FXA21F] |
v7.0.2 -> v7.2.0 |
| [FXE21F] |
v7.0.2 -> v7.2.0 |
| [FXA22F] |
v7.0.2 -> v7.2.0 |
| [FXE22F] |
v7.0.2 -> v7.2.0 |
| [FX212F] |
v7.0.2 -> v7.2.0 |
| [FX311F] |
v7.0.2 -> v7.2.0 |
| [FX312F] |
v7.0.2 -> v7.2.0 |
| [FX511F] |
v7.0.2 -> v7.2.0 |
| [FVG21F] |
v7.0.2 -> v7.2.0 |
| [FVA21F] |
v7.0.2 -> v7.2.0 |
| [FVG22F] |
v7.0.2 -> v7.2.0 |
| [FVA22F] |
v7.0.2 -> v7.2.0 |
| [FX04DA] |
v7.0.2 -> v7.2.0 |
| [FX04DN] |
v7.0.8 -> v7.0.12 |
| [FX04DI] |
v7.0.8 -> v7.0.12 |
- name - FortiExtender profile name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v7.0.2 -> v7.2.0 |
Notes
-----
.. note::
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: FortiExtender extender profile configuration.
fortinet.fortios.fortios_extender_controller_extender_profile:
vdom: "{{ vdom }}"
state: "present"
access_token: ""
extender_controller_extender_profile:
allowaccess: "ping"
bandwidth_limit: "1024"
cellular:
controller_report:
interval: "300"
signal_threshold: "10"
status: "disable"
dataplan:
-
name: "default_name_11 (source extender-controller.dataplan.name)"
modem1:
auto_switch:
dataplan: "disable"
disconnect: "disable"
disconnect_period: "600"
disconnect_threshold: "3"
signal: "disable"
switch_back: "time"
switch_back_time: ""
switch_back_timer: "86400"
conn_status: "0"
default_sim: "sim1"
gps: "disable"
preferred_carrier: ""
redundant_intf: ""
redundant_mode: "disable"
sim1_pin: "disable"
sim1_pin_code: ""
sim2_pin: "disable"
sim2_pin_code: ""
modem2:
auto_switch:
dataplan: "disable"
disconnect: "disable"
disconnect_period: "600"
disconnect_threshold: "3"
signal: "disable"
switch_back: "time"
switch_back_time: ""
switch_back_timer: "86400"
conn_status: "0"
default_sim: "sim1"
gps: "disable"
preferred_carrier: ""
redundant_intf: ""
redundant_mode: "disable"
sim1_pin: "disable"
sim1_pin_code: ""
sim2_pin: "disable"
sim2_pin_code: ""
sms_notification:
alert:
data_exhausted: ""
fgt_backup_mode_switch: ""
low_signal_strength: ""
mode_switch: ""
os_image_fallback: ""
session_disconnect: ""
system_reboot: ""
receiver:
-
alert: "system-reboot"
name: "default_name_63"
phone_number: ""
status: "disable"
status: "disable"
enforce_bandwidth: "enable"
extension: "wan-extension"
id: "69"
lan_extension:
backhaul:
-
name: "default_name_72"
port: "wan"
role: "primary"
weight: "1"
backhaul_interface: " (source system.interface.name)"
backhaul_ip: ""
ipsec_tunnel: ""
link_loadbalance: "activebackup"
login_password: ""
login_password_change: "yes"
model: "FX201E"
name: "default_name_83"
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.