:source: fortios_wireless_controller_wag_profile.py
:orphan:
.. fortios_wireless_controller_wag_profile:
fortios_wireless_controller_wag_profile -- Configure wireless access gateway (WAG) profiles used for tunnels on AP in Fortinet's FortiOS and FortiGate.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and wag_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.15
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v6.2.0 -> v7.6.6
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- wireless_controller_wag_profile - Configure wireless access gateway (WAG) profiles used for tunnels on AP. type: dict
more...
| Supported Version Ranges |
| wireless_controller_wag_profile |
v6.2.0 -> 7.6.6 |
- comment - Comment. type: str
more...
|
Supported Version Ranges |
| comment |
v6.2.0 -> 7.6.6 |
- dhcp_ip_addr - IP address of the monitoring DHCP request packet sent through the tunnel. type: str
more...
|
Supported Version Ranges |
| dhcp_ip_addr |
v6.2.0 -> 7.6.6 |
- name - Tunnel profile name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v6.2.0 -> 7.6.6 |
- ping_interval - Interval between two tunnel monitoring echo packets (1 - 65535 sec). type: int
more...
|
Supported Version Ranges |
| ping_interval |
v6.2.0 -> 7.6.6 |
- ping_number - Number of the tunnel monitoring echo packets (1 - 65535). type: int
more...
|
Supported Version Ranges |
| ping_number |
v6.2.0 -> 7.6.6 |
- return_packet_timeout - Window of time for the return packets from the tunnel"s remote end (1 - 65535 sec). type: int
more...
|
Supported Version Ranges |
| return_packet_timeout |
v6.2.0 -> 7.6.6 |
- tunnel_type - Tunnel type. type: str choices: l2tpv3, gre
more...
|
Supported Version Ranges |
| tunnel_type |
v6.2.0 -> 7.6.6 |
| [l2tpv3] |
v6.2.0 -> 7.6.6 |
| [gre] |
v6.2.0 -> 7.6.6 |
- wag_ip - IP Address of the wireless access gateway. type: str
more...
|
Supported Version Ranges |
| wag_ip |
v6.2.0 -> 7.6.6 |
- wag_port - UDP port of the wireless access gateway. type: int
more...
|
Supported Version Ranges |
| wag_port |
v6.2.0 -> 7.6.6 |
Notes
-----
.. note::
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: Configure wireless access gateway (WAG) profiles used for tunnels on AP.
fortinet.fortios.fortios_wireless_controller_wag_profile:
vdom: "{{ vdom }}"
state: "present"
access_token: ""
wireless_controller_wag_profile:
comment: "Comment."
dhcp_ip_addr: ""
name: "default_name_5"
ping_interval: "1"
ping_number: "5"
return_packet_timeout: "160"
tunnel_type: "l2tpv3"
wag_ip: ""
wag_port: "1701"
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.