:source: fortios_wireless_controller_syslog_profile.py
:orphan:
.. fortios_wireless_controller_syslog_profile:
fortios_wireless_controller_syslog_profile -- Configure Wireless Termination Points (WTP) system log server profile in Fortinet's FortiOS and FortiGate.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and syslog_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.15
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v7.0.2 -> v7.6.6
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- wireless_controller_syslog_profile - Configure Wireless Termination Points (WTP) system log server profile. type: dict
more...
| Supported Version Ranges |
| wireless_controller_syslog_profile |
v7.0.2 -> 7.6.6 |
- comment - Comment. type: str
more...
|
Supported Version Ranges |
| comment |
v7.0.2 -> 7.6.6 |
- log_level - Lowest level of log messages that FortiAP units send to this server . type: str choices: emergency, alert, critical, error, warning, notification, information, debugging
more...
|
Supported Version Ranges |
| log_level |
v7.0.2 -> 7.6.6 |
| [emergency] |
v7.0.2 -> 7.6.6 |
| [alert] |
v7.0.2 -> 7.6.6 |
| [critical] |
v7.0.2 -> 7.6.6 |
| [error] |
v7.0.2 -> 7.6.6 |
| [warning] |
v7.0.2 -> 7.6.6 |
| [notification] |
v7.0.2 -> 7.6.6 |
| [information] |
v7.0.2 -> 7.6.6 |
| [debugging] |
v7.0.2 -> 7.6.6 |
- name - WTP system log server profile name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v7.0.2 -> 7.6.6 |
- server - Syslog server CN domain name or IP address. type: str
more...
|
Supported Version Ranges |
| server |
v7.6.5 -> 7.6.6 |
- server_addr_type - Syslog server address type . type: str choices: fqdn, ip
more...
|
Supported Version Ranges |
| server_addr_type |
v7.0.2 -> v7.6.4 |
| [fqdn] |
v7.0.2 -> v7.6.4 |
| [ip] |
v7.0.2 -> v7.6.4 |
- server_fqdn - FQDN of syslog server that FortiAP units send log messages to. type: str
more...
|
Supported Version Ranges |
| server_fqdn |
v7.0.2 -> v7.6.4 |
- server_ip - IP address of syslog server that FortiAP units send log messages to. type: str
more...
|
Supported Version Ranges |
| server_ip |
v7.0.2 -> v7.6.4 |
- server_port - Port number of syslog server that FortiAP units send log messages to . type: int
more...
|
Supported Version Ranges |
| server_port |
v7.0.2 -> 7.6.6 |
- server_status - Enable/disable FortiAP units to send log messages to a syslog server . type: str choices: enable, disable
more...
|
Supported Version Ranges |
| server_status |
v7.0.2 -> 7.6.6 |
| [enable] |
v7.0.2 -> 7.6.6 |
| [disable] |
v7.0.2 -> 7.6.6 |
- server_type - Configure syslog server type . type: str choices: standard, fortianalyzer
more...
|
Supported Version Ranges |
| server_type |
v7.6.1 -> 7.6.6 |
| [standard] |
v7.6.1 -> 7.6.6 |
| [fortianalyzer] |
v7.6.1 -> 7.6.6 |
Notes
-----
.. note::
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: Configure Wireless Termination Points (WTP) system log server profile.
fortinet.fortios.fortios_wireless_controller_syslog_profile:
vdom: "{{ vdom }}"
state: "present"
access_token: ""
wireless_controller_syslog_profile:
comment: "Comment."
log_level: "emergency"
name: "default_name_5"
server: "192.168.100.40"
server_addr_type: "fqdn"
server_fqdn: ""
server_ip: ""
server_port: "514"
server_status: "enable"
server_type: "standard"
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.