:source: fortios_system_snmp_community.py
:orphan:
.. fortios_system_snmp_community:
fortios_system_snmp_community -- SNMP community configuration in Fortinet's FortiOS and FortiGate.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system_snmp feature and community category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.15
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v6.0.0 -> v7.6.6
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- system_snmp_community - SNMP community configuration. type: dict
more...
| Supported Version Ranges |
| system_snmp_community |
v6.0.0 -> 7.6.6 |
- events - SNMP trap events. type: list choices: cpu-high, mem-low, log-full, intf-ip, vpn-tun-up, vpn-tun-down, ha-switch, ha-hb-failure, ips-signature, ips-anomaly, av-virus, av-oversize, av-pattern, av-fragmented, fm-if-change, fm-conf-change, bgp-established, bgp-backward-transition, ha-member-up, ha-member-down, ent-conf-change, av-conserve, av-bypass, av-oversize-passed, av-oversize-blocked, ips-pkg-update, ips-fail-open, temperature-high, voltage-alert, power-supply, faz-disconnect, faz, fan-failure, wc-ap-up, wc-ap-down, fswctl-session-up, fswctl-session-down, load-balance-real-server-down, device-new, per-cpu-high, dhcp, pool-usage, ippool, interface, ospf-nbr-state-change, ospf-virtnbr-state-change, bfd, power-supply-failure
more...
|
Supported Version Ranges |
| events |
v6.0.0 -> 7.6.6 |
| [cpu-high] |
v6.0.0 -> 7.6.6 |
| [mem-low] |
v6.0.0 -> 7.6.6 |
| [log-full] |
v6.0.0 -> 7.6.6 |
| [intf-ip] |
v6.0.0 -> 7.6.6 |
| [vpn-tun-up] |
v6.0.0 -> 7.6.6 |
| [vpn-tun-down] |
v6.0.0 -> 7.6.6 |
| [ha-switch] |
v6.0.0 -> 7.6.6 |
| [ha-hb-failure] |
v6.0.0 -> 7.6.6 |
| [ips-signature] |
v6.0.0 -> 7.6.6 |
| [ips-anomaly] |
v6.0.0 -> 7.6.6 |
| [av-virus] |
v6.0.0 -> 7.6.6 |
| [av-oversize] |
v6.0.0 -> 7.6.6 |
| [av-pattern] |
v6.0.0 -> 7.6.6 |
| [av-fragmented] |
v6.0.0 -> 7.6.6 |
| [fm-if-change] |
v6.0.0 -> 7.6.6 |
| [fm-conf-change] |
v6.0.0 -> 7.6.6 |
| [bgp-established] |
v6.0.0 -> 7.6.6 |
| [bgp-backward-transition] |
v6.0.0 -> 7.6.6 |
| [ha-member-up] |
v6.0.0 -> 7.6.6 |
| [ha-member-down] |
v6.0.0 -> 7.6.6 |
| [ent-conf-change] |
v6.0.0 -> 7.6.6 |
| [av-conserve] |
v6.0.0 -> 7.6.6 |
| [av-bypass] |
v6.0.0 -> 7.6.6 |
| [av-oversize-passed] |
v6.0.0 -> 7.6.6 |
| [av-oversize-blocked] |
v6.0.0 -> 7.6.6 |
| [ips-pkg-update] |
v6.0.0 -> 7.6.6 |
| [ips-fail-open] |
v6.0.0 -> 7.6.6 |
| [temperature-high] |
v6.0.0 -> 7.6.6 |
| [voltage-alert] |
v6.0.0 -> 7.6.6 |
| [power-supply] |
v7.4.2 -> 7.6.6 |
| [faz-disconnect] |
v6.0.0 -> 7.6.6 |
| [faz] |
v7.4.1 -> 7.6.6 |
| [fan-failure] |
v6.0.0 -> 7.6.6 |
| [wc-ap-up] |
v6.0.0 -> 7.6.6 |
| [wc-ap-down] |
v6.0.0 -> 7.6.6 |
| [fswctl-session-up] |
v6.0.0 -> 7.6.6 |
| [fswctl-session-down] |
v6.0.0 -> 7.6.6 |
| [load-balance-real-server-down] |
v6.0.0 -> 7.6.6 |
| [device-new] |
v6.0.0 -> 7.6.6 |
| [per-cpu-high] |
v6.0.0 -> 7.6.6 |
| [dhcp] |
v6.4.0 -> 7.6.6 |
| [pool-usage] |
v7.0.6 -> v7.0.12 |
v7.2.1 -> 7.6.6 |
| [ippool] |
v7.6.0 -> 7.6.6 |
| [interface] |
v7.6.0 -> 7.6.6 |
| [ospf-nbr-state-change] |
v7.0.0 -> 7.6.6 |
| [ospf-virtnbr-state-change] |
v7.0.0 -> 7.6.6 |
| [bfd] |
v7.6.5 -> 7.6.6 |
| [power-supply-failure] |
v6.0.0 -> v7.4.1 |
- hosts - Configure IPv4 SNMP managers (hosts). type: list member_path: hosts:id
more...
| Supported Version Ranges |
| hosts |
v6.0.0 -> 7.6.6 |
- ha_direct - Enable/disable direct management of HA cluster members. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| ha_direct |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- host_type - Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. No traps will be sent when IP type is subnet. type: str choices: any, query, trap
more...
|
Supported Version Ranges |
| host_type |
v6.0.0 -> 7.6.6 |
| [any] |
v6.0.0 -> 7.6.6 |
| [query] |
v6.0.0 -> 7.6.6 |
| [trap] |
v6.0.0 -> 7.6.6 |
- id - Host entry ID. see Notes. type: int required: true
more...
|
Supported Version Ranges |
| id |
v6.0.0 -> 7.6.6 |
- interface - Specify outgoing interface to reach server. Source system.interface.name. type: str
more...
|
Supported Version Ranges |
| interface |
v7.6.0 -> 7.6.6 |
- interface_select_method - Specify how to select outgoing interface to reach server. type: str choices: auto, sdwan, specify
more...
|
Supported Version Ranges |
| interface_select_method |
v7.6.0 -> 7.6.6 |
| [auto] |
v7.6.0 -> 7.6.6 |
| [sdwan] |
v7.6.0 -> 7.6.6 |
| [specify] |
v7.6.0 -> 7.6.6 |
- ip - IPv4 address of the SNMP manager (host). type: str
more...
|
Supported Version Ranges |
| ip |
v6.0.0 -> 7.6.6 |
- source_ip - Source IPv4 address for SNMP traps. type: str
more...
|
Supported Version Ranges |
| source_ip |
v6.0.0 -> 7.6.6 |
- vrf_select - VRF ID used for connection to server. type: int
more...
|
Supported Version Ranges |
| vrf_select |
v7.6.1 -> 7.6.6 |
- hosts6 - Configure IPv6 SNMP managers. type: list member_path: hosts6:id
more...
| Supported Version Ranges |
| hosts6 |
v6.0.0 -> 7.6.6 |
- ha_direct - Enable/disable direct management of HA cluster members. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| ha_direct |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- host_type - Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. type: str choices: any, query, trap
more...
|
Supported Version Ranges |
| host_type |
v6.0.0 -> 7.6.6 |
| [any] |
v6.0.0 -> 7.6.6 |
| [query] |
v6.0.0 -> 7.6.6 |
| [trap] |
v6.0.0 -> 7.6.6 |
- id - Host6 entry ID. see Notes. type: int required: true
more...
|
Supported Version Ranges |
| id |
v6.0.0 -> 7.6.6 |
- interface - Specify outgoing interface to reach server. Source system.interface.name. type: str
more...
|
Supported Version Ranges |
| interface |
v7.6.0 -> 7.6.6 |
- interface_select_method - Specify how to select outgoing interface to reach server. type: str choices: auto, sdwan, specify
more...
|
Supported Version Ranges |
| interface_select_method |
v7.6.0 -> 7.6.6 |
| [auto] |
v7.6.0 -> 7.6.6 |
| [sdwan] |
v7.6.0 -> 7.6.6 |
| [specify] |
v7.6.0 -> 7.6.6 |
- ipv6 - SNMP manager IPv6 address prefix. type: str
more...
|
Supported Version Ranges |
| ipv6 |
v6.0.0 -> 7.6.6 |
- source_ipv6 - Source IPv6 address for SNMP traps. type: str
more...
|
Supported Version Ranges |
| source_ipv6 |
v6.0.0 -> 7.6.6 |
- vrf_select - VRF ID used for connection to server. type: int
more...
|
Supported Version Ranges |
| vrf_select |
v7.6.1 -> 7.6.6 |
- id - Community ID. see Notes. type: int required: true
more...
|
Supported Version Ranges |
| id |
v6.0.0 -> 7.6.6 |
- mib_view - SNMP access control MIB view. Source system.snmp.mib-view.name. type: str
more...
|
Supported Version Ranges |
| mib_view |
v7.2.0 -> 7.6.6 |
- name - Community name. type: str
more...
|
Supported Version Ranges |
| name |
v6.0.0 -> 7.6.6 |
- query_v1_port - SNMP v1 query port . type: int
more...
|
Supported Version Ranges |
| query_v1_port |
v6.0.0 -> 7.6.6 |
- query_v1_status - Enable/disable SNMP v1 queries. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| query_v1_status |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- query_v2c_port - SNMP v2c query port . type: int
more...
|
Supported Version Ranges |
| query_v2c_port |
v6.0.0 -> 7.6.6 |
- query_v2c_status - Enable/disable SNMP v2c queries. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| query_v2c_status |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- status - Enable/disable this SNMP community. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| status |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- trap_v1_lport - SNMP v1 trap local port . type: int
more...
|
Supported Version Ranges |
| trap_v1_lport |
v6.0.0 -> 7.6.6 |
- trap_v1_rport - SNMP v1 trap remote port . type: int
more...
|
Supported Version Ranges |
| trap_v1_rport |
v6.0.0 -> 7.6.6 |
- trap_v1_status - Enable/disable SNMP v1 traps. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| trap_v1_status |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- trap_v2c_lport - SNMP v2c trap local port . type: int
more...
|
Supported Version Ranges |
| trap_v2c_lport |
v6.0.0 -> 7.6.6 |
- trap_v2c_rport - SNMP v2c trap remote port . type: int
more...
|
Supported Version Ranges |
| trap_v2c_rport |
v6.0.0 -> 7.6.6 |
- trap_v2c_status - Enable/disable SNMP v2c traps. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| trap_v2c_status |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- vdoms - SNMP access control VDOMs. type: list member_path: vdoms:name
more...
| Supported Version Ranges |
| vdoms |
v7.2.0 -> 7.6.6 |
- name - VDOM name. Source system.vdom.name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v7.2.0 -> 7.6.6 |
Notes
-----
.. note::
- We highly recommend using your own value as the id instead of 0, while '0' is a special placeholder that allows the backend to assign the latest available number for the object, it does have limitations. Please find more details in Q&A.
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: SNMP community configuration.
fortinet.fortios.fortios_system_snmp_community:
vdom: "{{ vdom }}"
state: "present"
access_token: ""
system_snmp_community:
events: "cpu-high"
hosts:
-
ha_direct: "enable"
host_type: "any"
id: "7"
interface: " (source system.interface.name)"
interface_select_method: "auto"
ip: ""
source_ip: "84.230.14.43"
vrf_select: "0"
hosts6:
-
ha_direct: "enable"
host_type: "any"
id: "16"
interface: " (source system.interface.name)"
interface_select_method: "auto"
ipv6: ""
source_ipv6: ""
vrf_select: "0"
id: "22"
mib_view: " (source system.snmp.mib-view.name)"
name: "default_name_24"
query_v1_port: "161"
query_v1_status: "enable"
query_v2c_port: "161"
query_v2c_status: "enable"
status: "enable"
trap_v1_lport: "162"
trap_v1_rport: "162"
trap_v1_status: "enable"
trap_v2c_lport: "162"
trap_v2c_rport: "162"
trap_v2c_status: "enable"
vdoms:
-
name: "default_name_37 (source system.vdom.name)"
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.