:source: fortios_system_api_user.py
:orphan:
.. fortios_system_api_user:
fortios_system_api_user -- Configure API users in Fortinet's FortiOS and FortiGate.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and api_user category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.15
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v6.0.0 -> v7.6.6
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- state - Indicates whether to create or remove the object. type: str required: true choices: present, absent
- system_api_user - Configure API users. type: dict
more...
| Supported Version Ranges |
| system_api_user |
v6.0.0 -> 7.6.6 |
- accprofile - Admin user access profile. Source system.accprofile.name. type: str
more...
|
Supported Version Ranges |
| accprofile |
v6.0.0 -> 7.6.6 |
- api_key - Admin user password. type: str
more...
|
Supported Version Ranges |
| api_key |
v6.0.0 -> 7.6.6 |
- comments - Comment. type: str
more...
|
Supported Version Ranges |
| comments |
v6.0.0 -> 7.6.6 |
- cors_allow_origin - Value for Access-Control-Allow-Origin on API responses. Avoid using "*" if possible. type: str
more...
|
Supported Version Ranges |
| cors_allow_origin |
v6.0.0 -> 7.6.6 |
- name - User name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v6.0.0 -> 7.6.6 |
- peer_auth - Enable/disable peer authentication. type: str choices: enable, disable
more...
|
Supported Version Ranges |
| peer_auth |
v6.0.0 -> 7.6.6 |
| [enable] |
v6.0.0 -> 7.6.6 |
| [disable] |
v6.0.0 -> 7.6.6 |
- peer_group - Peer group name. type: str
more...
|
Supported Version Ranges |
| peer_group |
v6.0.0 -> 7.6.6 |
- schedule - Schedule name. type: str
more...
|
Supported Version Ranges |
| schedule |
v6.0.0 -> 7.6.6 |
- trusthost - Trusthost. type: list member_path: trusthost:id
more...
| Supported Version Ranges |
| trusthost |
v6.0.0 -> 7.6.6 |
- id - ID. see Notes. type: int required: true
more...
|
Supported Version Ranges |
| id |
v6.0.0 -> 7.6.6 |
- ipv4_trusthost - IPv4 trusted host address. type: str
more...
|
Supported Version Ranges |
| ipv4_trusthost |
v6.0.0 -> 7.6.6 |
- ipv6_trusthost - IPv6 trusted host address. type: str
more...
|
Supported Version Ranges |
| ipv6_trusthost |
v6.0.0 -> 7.6.6 |
- type - Trusthost type. type: str choices: ipv4-trusthost, ipv6-trusthost
more...
|
Supported Version Ranges |
| type |
v6.0.0 -> 7.6.6 |
| [ipv4-trusthost] |
v6.0.0 -> 7.6.6 |
| [ipv6-trusthost] |
v6.0.0 -> 7.6.6 |
- vdom - Virtual domains. type: list member_path: vdom:name
more...
| Supported Version Ranges |
| vdom |
v6.0.0 -> 7.6.6 |
- name - Virtual domain name. Source system.vdom.name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v6.0.0 -> 7.6.6 |
Notes
-----
.. note::
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: Configure API users.
fortinet.fortios.fortios_system_api_user:
vdom: "{{ vdom }}"
state: "present"
access_token: ""
system_api_user:
accprofile: " (source system.accprofile.name)"
api_key: ""
comments: ""
cors_allow_origin: ""
name: "default_name_7"
peer_auth: "enable"
peer_group: ""
schedule: ""
trusthost:
-
id: "12"
ipv4_trusthost: "myhostname"
ipv6_trusthost: "myhostname"
type: "ipv4-trusthost"
vdom:
-
name: "default_name_17 (source system.vdom.name)"
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.