:source: fortios_switch_controller_traffic_sniffer.py
:orphan:
.. fortios_switch_controller_traffic_sniffer:
fortios_switch_controller_traffic_sniffer -- Configure FortiSwitch RSPAN/ERSPAN traffic sniffing parameters in Fortinet's FortiOS and FortiGate.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify switch_controller feature and traffic_sniffer category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.15
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v6.2.0 -> v7.6.6
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- switch_controller_traffic_sniffer - Configure FortiSwitch RSPAN/ERSPAN traffic sniffing parameters. type: dict
more...
| Supported Version Ranges |
| switch_controller_traffic_sniffer |
v6.2.0 -> 7.6.6 |
- erspan_ip - Configure ERSPAN collector IP address. type: str
more...
|
Supported Version Ranges |
| erspan_ip |
v6.2.0 -> 7.6.6 |
- mode - Configure traffic sniffer mode. type: str choices: erspan-auto, rspan, none
more...
|
Supported Version Ranges |
| mode |
v6.2.0 -> 7.6.6 |
| [erspan-auto] |
v6.2.0 -> 7.6.6 |
| [rspan] |
v6.2.0 -> 7.6.6 |
| [none] |
v6.2.0 -> 7.6.6 |
- target_ip - Sniffer IPs to filter. type: list member_path: target_ip:ip
more...
| Supported Version Ranges |
| target_ip |
v6.2.0 -> 7.6.6 |
- description - Description for the sniffer IP. type: str
more...
|
Supported Version Ranges |
| description |
v6.2.0 -> 7.6.6 |
- dst_entry_id - FortiSwitch dest entry ID for the sniffer IP. type: int
more...
|
Supported Version Ranges |
| dst_entry_id |
v6.2.3 -> v6.2.3 |
- ip - Sniffer IP. type: str required: true
more...
|
Supported Version Ranges |
| ip |
v6.2.0 -> 7.6.6 |
- src_entry_id - FortiSwitch source entry ID for the sniffer IP. type: int
more...
|
Supported Version Ranges |
| src_entry_id |
v6.2.3 -> v6.2.3 |
- target_mac - Sniffer MACs to filter. type: list member_path: target_mac:mac
more...
| Supported Version Ranges |
| target_mac |
v6.2.0 -> 7.6.6 |
- description - Description for the sniffer MAC. type: str
more...
|
Supported Version Ranges |
| description |
v6.2.0 -> 7.6.6 |
- dst_entry_id - FortiSwitch dest entry ID for the sniffer MAC. type: int
more...
|
Supported Version Ranges |
| dst_entry_id |
v6.2.3 -> v6.2.3 |
- mac - Sniffer MAC. type: str required: true
more...
|
Supported Version Ranges |
| mac |
v6.2.0 -> 7.6.6 |
- src_entry_id - FortiSwitch source entry ID for the sniffer MAC. type: int
more...
|
Supported Version Ranges |
| src_entry_id |
v6.2.3 -> v6.2.3 |
- target_port - Sniffer ports to filter. type: list member_path: target_port:switch_id
more...
| Supported Version Ranges |
| target_port |
v6.2.0 -> 7.6.6 |
- description - Description for the sniffer port entry. type: str
more...
|
Supported Version Ranges |
| description |
v6.2.0 -> 7.6.6 |
- in_ports - Configure source ingress port interfaces. type: list member_path: target_port:switch_id/in_ports:name
more...
| Supported Version Ranges |
| in_ports |
v6.2.0 -> 7.6.6 |
- name - Interface name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v6.2.0 -> 7.6.6 |
- out_ports - Configure source egress port interfaces. type: list member_path: target_port:switch_id/out_ports:name
more...
| Supported Version Ranges |
| out_ports |
v6.2.0 -> 7.6.6 |
- name - Interface name. type: str required: true
more...
|
Supported Version Ranges |
| name |
v6.2.0 -> 7.6.6 |
- switch_id - Managed-switch ID. Source switch-controller.managed-switch.switch-id. type: str required: true
more...
|
Supported Version Ranges |
| switch_id |
v6.2.0 -> 7.6.6 |
Notes
-----
.. note::
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: Configure FortiSwitch RSPAN/ERSPAN traffic sniffing parameters.
fortinet.fortios.fortios_switch_controller_traffic_sniffer:
vdom: "{{ vdom }}"
switch_controller_traffic_sniffer:
erspan_ip: ""
mode: "erspan-auto"
target_ip:
-
description: ""
dst_entry_id: "2147483647"
ip: ""
src_entry_id: "2147483647"
target_mac:
-
description: ""
dst_entry_id: "2147483647"
mac: ""
src_entry_id: "2147483647"
target_port:
-
description: ""
in_ports:
-
name: "default_name_18"
out_ports:
-
name: "default_name_20"
switch_id: " (source switch-controller.managed-switch.switch-id)"
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.