:source: fortios_switch_controller_802_1x_settings.py
:orphan:
.. fortios_switch_controller_802_1x_settings:
fortios_switch_controller_802_1x_settings -- Configure global 802.1X settings in Fortinet's FortiOS and FortiGate.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.. versionadded:: 2.0.0
.. contents::
:local:
:depth: 1
Synopsis
--------
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify switch_controller feature and 802_1x_settings category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
------------
The below requirements are needed on the host that executes this module.
- ansible>=2.15
Tips
----
Using member operation to add an element to an existing object.
FortiOS Version Compatibility
-----------------------------
Supported Version Ranges: v6.0.0 -> v7.6.6
Parameters
----------
.. raw:: html
- access_token - Token-based authentication. Generated from GUI of Fortigate. type: str required: false
- enable_log - Enable/Disable logging for task. type: bool required: false default: False
- vdom - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str default: root
- member_path - Member attribute path to operate on. type: str
- member_state - Add or delete a member under specified attribute path. type: str choices: present, absent
- switch_controller_802_1x_settings - Configure global 802.1X settings. type: dict
more...
| Supported Version Ranges |
| switch_controller_802_1x_settings |
v6.0.0 -> 7.6.6 |
- link_down_auth - Interface-reauthentication state to set if a link is down. type: str choices: set-unauth, no-action
more...
|
Supported Version Ranges |
| link_down_auth |
v6.0.0 -> 7.6.6 |
| [set-unauth] |
v6.0.0 -> 7.6.6 |
| [no-action] |
v6.0.0 -> 7.6.6 |
- mab_reauth - Enable/disable MAB re-authentication. type: str choices: disable, enable
more...
|
Supported Version Ranges |
| mab_reauth |
v7.2.0 -> 7.6.6 |
| [disable] |
v7.2.0 -> 7.6.6 |
| [enable] |
v7.2.0 -> 7.6.6 |
- mac_called_station_delimiter - MAC called station delimiter . type: str choices: colon, hyphen, none, single-hyphen
more...
|
Supported Version Ranges |
| mac_called_station_delimiter |
v7.4.2 -> 7.6.6 |
| [colon] |
v7.4.2 -> 7.6.6 |
| [hyphen] |
v7.4.2 -> 7.6.6 |
| [none] |
v7.4.2 -> 7.6.6 |
| [single-hyphen] |
v7.4.2 -> 7.6.6 |
- mac_calling_station_delimiter - MAC calling station delimiter . type: str choices: colon, hyphen, none, single-hyphen
more...
|
Supported Version Ranges |
| mac_calling_station_delimiter |
v7.4.2 -> 7.6.6 |
| [colon] |
v7.4.2 -> 7.6.6 |
| [hyphen] |
v7.4.2 -> 7.6.6 |
| [none] |
v7.4.2 -> 7.6.6 |
| [single-hyphen] |
v7.4.2 -> 7.6.6 |
- mac_case - MAC case . type: str choices: lowercase, uppercase
more...
|
Supported Version Ranges |
| mac_case |
v7.4.2 -> 7.6.6 |
| [lowercase] |
v7.4.2 -> 7.6.6 |
| [uppercase] |
v7.4.2 -> 7.6.6 |
- mac_password_delimiter - MAC authentication password delimiter . type: str choices: colon, hyphen, none, single-hyphen
more...
|
Supported Version Ranges |
| mac_password_delimiter |
v7.4.2 -> 7.6.6 |
| [colon] |
v7.4.2 -> 7.6.6 |
| [hyphen] |
v7.4.2 -> 7.6.6 |
| [none] |
v7.4.2 -> 7.6.6 |
| [single-hyphen] |
v7.4.2 -> 7.6.6 |
- mac_username_delimiter - MAC authentication username delimiter . type: str choices: colon, hyphen, none, single-hyphen
more...
|
Supported Version Ranges |
| mac_username_delimiter |
v7.4.2 -> 7.6.6 |
| [colon] |
v7.4.2 -> 7.6.6 |
| [hyphen] |
v7.4.2 -> 7.6.6 |
| [none] |
v7.4.2 -> 7.6.6 |
| [single-hyphen] |
v7.4.2 -> 7.6.6 |
- max_reauth_attempt - Maximum number of authentication attempts (0 - 15). type: int
more...
|
Supported Version Ranges |
| max_reauth_attempt |
v6.0.0 -> 7.6.6 |
- reauth_period - Period of time to allow for reauthentication (1 - 1440 sec). type: int
more...
|
Supported Version Ranges |
| reauth_period |
v6.0.0 -> 7.6.6 |
- tx_period - 802.1X Tx period (seconds). type: int
more...
|
Supported Version Ranges |
| tx_period |
v6.4.0 -> 7.6.6 |
Notes
-----
.. note::
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
- The module supports check_mode.
Examples
--------
.. code-block:: yaml+jinja
- name: Configure global 802.1X settings.
fortinet.fortios.fortios_switch_controller_802_1x_settings:
vdom: "{{ vdom }}"
switch_controller_802_1x_settings:
link_down_auth: "set-unauth"
mab_reauth: "disable"
mac_called_station_delimiter: "colon"
mac_calling_station_delimiter: "colon"
mac_case: "lowercase"
mac_password_delimiter: "colon"
mac_username_delimiter: "colon"
max_reauth_attempt: "3"
reauth_period: "60"
tx_period: "30"
Return Values
-------------
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
.. raw:: html
- build - Build number of the fortigate image returned: always type: str sample: 1547
- http_method - Last method used to provision the content into FortiGate returned: always type: str sample: PUT
- http_status - Last result given by FortiGate on last operation applied returned: always type: str sample: 200
- mkey - Master key (id) used in the last call to FortiGate returned: success type: str sample: id
- name - Name of the table used to fulfill the request returned: always type: str sample: urlfilter
- path - Path of the table used to fulfill the request returned: always type: str sample: webfilter
- revision - Internal revision number returned: always type: str sample: 17.0.2.10658
- serial - Serial number of the unit returned: always type: str sample: FGVMEVYYQT3AB5352
- status - Indication of the operation's result returned: always type: str sample: success
- vdom - Virtual domain used returned: always type: str sample: root
- version - Version of the FortiGate returned: always type: str sample: v5.6.3
Status
------
- This module is not guaranteed to have a backwards compatible interface.
Authors
-------
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
.. hint::
If you notice any issues in this documentation, you can create a pull request to improve it.